Page 1 of 1

post your mesecons builds (screenshots)

PostPosted: Fri Oct 02, 2015 12:27
by thomasthespacefox
I'm curious what other people have been making with mesecons.


Image
(underside of my 4x5 disco floor)
Image
(4x4x3 3D printer)

Re: post your mesecons builds (screenshots)

PostPosted: Fri Oct 09, 2015 00:46
by Tmanyo
I tried making an elevator normal and one of those people use to load straw or hay into a barn. Neither worked though sadly.... My favorite thing I made was using command blocks to make a question maze, where you travel through answering questions from a choice of 3 buttons. But I have made a lot with Mesecon...

Re: post your mesecons builds (screenshots)

PostPosted: Fri Nov 04, 2016 10:40
by Baryhobal
I build a 2x2, 3x3 and 4x4 piston doors and this is my triple piston extender.

Re: post your mesecons builds (screenshots)

PostPosted: Fri Nov 04, 2016 11:45
by PEAK
T Flip-Flop:

Image

Re: post your mesecons builds (screenshots)

PostPosted: Fri Nov 04, 2016 16:55
by Baryhobal
An other type of flip flop:
Image
flip
Image
flop

PS:sorry for the uggly background

Re: post your mesecons builds (screenshots)

PostPosted: Tue Nov 08, 2016 21:00
by cheapie
Do digilines and other mesecons/digilines-related mods count? I suppose the Luacontroller is from mesecons...

Image
"Minetest", a clock, and Tic-Tac-Toe, one LuaC, lots of rgblightstone and buttons from digistuff

Image
The monitoring screen of my LTC-4000 traffic light controller, showing off some of the capabilities of the touchscreen from digistuff

Image
"Gas Pump", supports up to 8 pumps, settable price, prepay or pay-at-the-pump, etc.

Re: post your mesecons builds (screenshots)

PostPosted: Tue Jun 06, 2017 22:38
by thomasthespacefox
Image
This nifty contraption is a 3-tier, dual sided, piston gate, that is powered by a single switch.
Image
here is a basic version of the mechanism:
Image
The idea is, the inner tier rails are powered first, and then through a delayer, the inner tier powers the middle tier, then, the same for the outer tier, and through another repeater, the outer tier, powers the middle tier when it retracts, that way, the inner tier is retracted to its open position.

Re: post your mesecons builds (screenshots)

PostPosted: Tue Apr 24, 2018 20:54
by thomasthespacefox
figured id share this little tip someplace:
(note the button going into the side, and the switches that don't match the output lights)
Image
using the normal microcontroller, (not the luacontroller or fpga) and punching in this line of code:
Code: Select all
sbi(A,C);if(A)sbi(B,D);

creates a pule-updated memory cell component.

how it works:
A is the pulse-line input
C is the pulse-line output (for chaining them. i.e. registers)

B is the input. it is only read upon a mese signal on the pulse-line input (A in example code)
D is the output of the "memory cell" (microcontroller)

Re: post your mesecons builds (screenshots)

PostPosted: Wed Apr 25, 2018 07:39
by parasite
Another flip-flop

Here you have the front view:
Image

here you have the back view:
Image

This is the gated S-R latch. Two buttons S, R switch the light to yellow or red. This can be considered as system input. The state of the system on the input can be remembered at the time selected by the player and frozen for as long as the player wishes. The player does this with lever E. In a real system of this type, it is not the man who controls it, but the pulse of the clock. But this is a minetest. Alternatively, the system can be expanded and automated to select one of two possibilities at a certain time or event. For example, did someone else visit your base on the server when you were off-line. But it's easier to build something like that with a luacontroller, I guess. Here you can find a diagram and a table explaining how this S-R latch works in real.

Re: post your mesecons builds (screenshots)

PostPosted: Tue May 14, 2019 02:26
by thomasthespacefox
Image

2-state Lightstone Disco floor with custom pattern

How it works:
- a grid of straight insulated wires, with not gates strewn in where inversions in each row are needed.
- Blinky Power plant toggles the rows,
- mesecons torches convey the power state of the piece below them to the disco floor lightstone blocks.
- in this example, each odd row has an initial inversion.
- a not gate will match its above lightstone.
- a insulated wire will NOT match its above lightstone.

Figured id post this here as its simple enough to understand from the screenshot.

Re: post your mesecons builds (screenshots)

PostPosted: Mon May 20, 2019 16:20
by benrob0329
Current Fastest Piston Elevator Design: https://youtu.be/WRcRdHtBBMU

Sequel To "The Mese House" (similar to a piston house): https://youtu.be/N0BoP3zY6wU

Tutorial On Basic Circuits: https://youtu.be/i9mUI7ZV7I0

Automatic Tree Farm: https://youtu.be/7YqcDmvgNrY

Lot's of little things beyond that, mostly scattered throughout VE-Creative.

Re: post your mesecons builds (screenshots)

PostPosted: Mon May 20, 2019 22:25
by cheapie
Since benrob0329 seems to like building elevators that don't use Luacontrollers, here's a 3-stop movestone elevator, with working doors, that doesn't use any Luacontrollers or even the logic gates: https://www.youtube.com/watch?v=FFMTDol5KvE - the video is a bit old and was taken before the actual building was built or the car buttons were put in. The picture below was taken later.

Image

Re: post your mesecons builds (screenshots)

PostPosted: Tue May 21, 2019 01:15
by GarnetDeGelder
I managed to create a memory cell that uses only one FPGA gate.

Inputs/outputs:
Code: Select all
A: Input signal
B: Set state to input
C: State (output signal)
D: Set state to inverse of input

Notes:
If both B and D are on, it will set the state to the input signal (not the inverse, i.e. B overrides D)
If the input signal changes while B or D are on, the state will update accordingly

Gate configuration:
Code: Select all
A AND B -> 0
A OR B -> 1
NOT 1 -> 2
2 AND D -> 3
B OR D -> 4
NOT 4 -> 5
5 AND C -> 6
3 OR 6 -> 7
0 OR 7 -> C


Note that it relies on being able to read an write an output in each update which I'm not sure is "documented" behavior.

(To make this, I used a Karnaugh map with all the inputs and desired output and did simple boolean optimizations, such as De Morgan's law.)

Re: post your mesecons builds (screenshots)

PostPosted: Sun Jun 09, 2019 14:19
by yw05
I made a (very) simple rocket and I can't stop it now...
(Solution: Settings > Reset singleplayer world...)
Image

Re: post your mesecons builds (screenshots)

PostPosted: Wed Jun 26, 2019 16:40
by Miniontoby
I have made three "20 color" slots in minetest to secure my door (now it's a normal steel door)

Frontside:
Image

Backside:
Image

P.S. There is coming a tutorial video

Re: post your mesecons builds (screenshots)

PostPosted: Mon Sep 30, 2019 21:30
by Mathias
I made a device that detects and saves the names of players who came within a 9 node distance of the player detector. It also saves the time in seconds that each player was in the area. The parts consist of a lua controller in the center, two buttons on two ports, one additional port having the digistuff player detector, and the other port having a scifi screen. The first number is the "page" number; one of the buttons increases an integer value, which is associated with a player. Each time a new player is found, the value is increased, so one of the buttons increases the value and the other button/ switch decreases the value.

Image
Image
Image

I recently got a new computer, and I am looking forward to adding a video showing the function.

Here it is:

https://youtu.be/Qr4LoYF6W-M